HP Laserjet 4200 Printer

Error Codes and Support

Error:

13.06.00 JAM INSIDE REARDOOR

Error Description:

A page is jammed near the rear output door.

Solution:

1 Press ? ( HELP button) for detailed information about clearing the jam. 2 Press ( UP ARROW button) and (DOWN ARROW button) to step through the instructions. 3 Check the paper-width and fuser delivery sensors (PS106, PS108) and verify that the sensor arms move freely. (See Printer switches and sensors.) 4 Check the inside of the duplexer for scraps of media that might have torn off when a jam was cleared. 5 Replace the media-size sensor (PS106) and fuser. See Printer switches and sensors and Fuser. 6 Turn the power off. Remove the duplexer and turn the power on. If the error message persists, replace the dc controller PCA. See Dc controller PCA. 7 If the error message appears frequently, see Paper-path troubleshooting.

HP Laserjet 4200 DC Controller Board

MFG Part Number: RG1-4236-000CN     Condition:Refurbished    MFG:HP

This HP RG1-4236-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$12.00

HP RM1-0013-000CN Fuser Assembly For Laserjet 4200 Series

MFG Part Number: RM1-0013-000CN     Condition:Refurbished    MFG:HP

This HP RM1-0013-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$69.00

Call for Assistance 844-755-3000