HP Laserjet 4200 Printer

Error Codes and Support

Error:

13.20.00 JAM IN TOP

Error Description:

A jam exists in the top-cover area. A 13.20.00 error message indicates that the printer power was turned on or that the printer attempted to initialize while the prefeed sensor (PS102), the top-of-page sensor (PS103) or the fuser delivery sensor (PS1

Solution:

1 Press ? ( HELP button) for detailed information about clearing the jam. 2 Press ( UP ARROW button) and (DOWN ARROW button to step through the instructions. 3 Check the pre-feed, top-of-page, and fuser assembly sensors (PS102, PS103, and PS 108) and verify that the sensor arms move freely. (See Printer switches and sensors.) 4 If the paper-feed assembly has been replaced, verify that the pre-feed sensor (PS102) is installed correctly. See Paper-feed assembly. 5 Replace the top-of-page sensor (PS103). See Printer switches and sensors. 6 Replace the top-cover-open switch (SW101). See Printer switches and sensors. 7 Replace the fuser. See Fuser. 8 Replace the dc controller PCA. See Dc controller PCA. 9 If this error message appears frequently, see Paper-path troubleshooting.

HP Laserjet 4200 DC Controller Board

MFG Part Number: RG1-4236-000CN     Condition:Refurbished    MFG:HP

This HP RG1-4236-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$12.00

HP RM1-0013-000CN Fuser Assembly For Laserjet 4200 Series

MFG Part Number: RM1-0013-000CN     Condition:Refurbished    MFG:HP

This HP RM1-0013-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$69.00

Call for Assistance 844-755-3000