HP Laserjet 4200 Printer

Error Codes and Support


TRAY XX{TYPE} {SIZE}To change typepressalternates withTRAY XX{TYPE} {SIZE}Size detected by tray

Error Description:

The printer is reporting the current configuration of tray XX. The tray switch is in the Standard position.


1 To change the media type, press (SELECT button). Use (UP ARROW button) and (DOWN ARROW button) to scroll to the type, and then press to select it. 2 To change the media size to Letter, A4, Executive, B5 JIS, A5, or Legal, leave the tray switch in the Standard position and adjust the media guides to the correct positions. 3 To change the media size to other sizes, move the tray switch to Custom, adjust the paper guides against the stack, and close the tray. 4 Use and to scroll to the media size, and then press to select it. Repeat this procedure to select the media type. 5 If the size that appears on the controlpanel display is incorrect and the tray paper guides are correctly adjusted, verify that the media-size sensor (SW102, SW801, or SW1) for the indicated tray is operating. See Printer switches and sensors, 500-sheet feeder switches, sensors, solenoids, and PCAs, or 1,500-sheet feeder switches, sensors, solenoids, and PCAs. Verify that the sensor "fingers" inside the tray are engaging the tray sensor correctly. See Tray 2, 500-sheet feeder, and 1,500-sheet feeder media-size detection.

Call for Assistance 844-755-3000