HP Laserjet 4200 Printer

Error Codes and Support


SIZE MISMATCH INTRAY XXFor help pressalternates withReadyFor menus press "CheckMark Icon"

Error Description:

The tray is loaded with media that is longer or shorter in the feed direction than the size setting for the tray.


1 Adjust the side and rear paper guides against the stack. From the control panel, set the tray 1 paper size to the media size that is in tray 1. 2 If the media being used is Letter, A4, Executive, B5 JIS, A5, or Legal size, the tray switch should be set to standard. Set the tray switch to custom for all other media sizes. The custom size switch must be set before the size can be selected at the control panel. 3 Print a configuration page and verify that the tray size settings match the actual tray settings. If the settings do not match, verify that the tray size sensors are correctly functioning. If they are not, replace the media-size sensors (SW102, SW801, or SW1). See Printer switches and sensors, 500- sheet feeder switches, sensors, solenoids, and PCAs, or 1,500-sheet feeder switches, sensors, solenoids, and PCAs. . Verify that the sensor "fingers" inside the tray are engaging the tray sensor correctly. See Tray 2, 500-sheet feeder, and 1,500-sheet feeder media-size detection. 4 Replace the indicated feeder-control PCA. For the 500-sheet feeder, see 500-sheet feeder control PCA. For the 1,500-sheet feeder, see 1,500-sheet feeder control PCA. 5 Replace the dc controller PCA. See Dc controller PCA.

HP Laserjet 4200 DC Controller Board

MFG Part Number: RG1-4236-000CN     Condition:Refurbished    MFG:HP

This HP RG1-4236-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.


Call for Assistance 844-755-3000