HP Laserjet 4200 Printer

Error Codes and Support

Error:

INSTALL FUSERFor help press ?

Error Description:

The fuser is either not installed or not correctly installed in the printer.

Solution:

1 The fuser is not fully seated or has been removed and must be reinstalled for printing to continue. See Fuser. 􀆔 If the fuser is in the printer, remove and reinstall it. 􀆔 If the fuser is not in the printer, install it. 2 Push the fuser firmly into the printer until the blue levers on both sides click into place. 3 Press ( HELP button) for detailed information. 4 Press ( UP ARROW button) and (DOWN ARROW button) to step through the instructions. 5 If the error persists, replace the fuser assembly. See Fuser. 6 Replace the dc controller PCA. See Dc controller PCA. 7 Replace the power-supply assembly. See Power supply.

HP Laserjet 4200 DC Controller Board

MFG Part Number: RG1-4236-000CN     Condition:Refurbished    MFG:HP

This HP RG1-4236-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$15.00

HP RM1-0013-000CN Fuser Assembly For Laserjet 4200 Series

MFG Part Number: RM1-0013-000CN     Condition:Refurbished    MFG:HP

This HP RM1-0013-000CN is Genuine and works with the HP 4200 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$69.00

Call for Assistance 844-755-3000