HP Laserjet 4100 Printer

Error Codes and Support

Error:

41.5 PRINTER ERROR

Error Description:

The media reached the PS102 or PS103 sensor too early.

Solution:

1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter.

HP C4169-69001 Laserjet 4100 Formatter Board

MFG Part Number: C4169-69001     Condition:Refurbished    MFG:HP

This HP C4169-69001 is Genuine and works with the HP 4100 Printer series. Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional.

$29.00

HP Laserjet 32mb Memory C7845a 1200 4000 5000 8000

MFG Part Number: C7845A     Condition:Refurbished    MFG:HP

$19.00

Call for Assistance 844-755-3000